Let’s travel together. Lab – Tracing a Route (Instructor Version)



  • Part 1: Verifying Network Connectivity Using Ping
  • Part 2: Tracing a Route to a Remote Server Using Traceroute
  • Part 3: Trace a Route to a Remote Server Using Web-Based Traceroute Tool


Tracing a route will list each routing device that a packet crosses as it traverses the network from source to destination. Route tracing is typically executed at the command line as:

tracert <destination network name or end device address>

(Microsoft Windows systems)


traceroute <destination network name or end device address>

(Unix and similar systems)

The traceroute (or tracert) tool is often used for network troubleshooting. By showing a list of routers traversed, it allows the user to identify the path taken to reach a particular destination on the network or across internetworks. Each router represents a point where one network connects to another network and through which the data packet was forwarded. The number of routers is known as the number of “hops” the data traveled from source to destination.

The displayed list can help identify data flow problems when trying to access a service such as a website. It can also be useful when performing tasks such as downloading data. If there are multiple websites (mirrors) available for the same data file, one can trace each mirror to get a good idea of which mirror would be the fastest to use.

Two trace routes between the same source and destination conducted some time apart may produce different results. This is due to the “meshed” nature of the interconnected networks that comprise the Internet and the Internet Protocols’ ability to select different pathways over which to send packets.

Command-line-based route tracing tools are usually embedded with the operating system of the end device.


Using an Internet connection, you will use two route tracing utilities to examine the Internet pathway to destination networks. First, you will verify connectivity to a website. Second, you will use the traceroute utility on the Linux command line. Third, you will use a web-based traceroute tool

Required Resources

  • CyberOps Workstation VM
  • Internet access

Part 1: Verifying Network Connectivity Using Ping

To trace the route to a distant network, the VM must have a working connection to the Internet.

a. Start the CyberOps Worstation VM. Log into the VM with the following credentials:

Username: analyst
Password: cyberops

b. Open a terminal window in the VM to ping a remote server, such as www.cisco.com.

[analyst@secOps ~]$ ping -c 4 www.cisco.com
PING e2867.dsca.akamaiedge.net ( 56(84) bytes of data.
64 bytes from a184-24-123-103.deploy.static.akamaitechnologies.com
( icmp_seq=1 ttl=59 time=13.0 ms
64 bytes from a184-24-123-103.deploy.static.akamaitechnologies.com
( icmp_seq=2 ttl=59 time=12.5 ms
64 bytes from a184-24-123-103.deploy.static.akamaitechnologies.com
( icmp_seq=3 ttl=59 time=14.9 ms
64 bytes from a184-24-123-103.deploy.static.akamaitechnologies.com
( icmp_seq=4 ttl=59 time=11.9 ms

--- e2867.dsca.akamaiedge.net ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 11.976/13.143/14.967/1.132 ms

c. The first output line displays the Fully Qualified Domain Name (FQDN) e2867.dsca.akamaiedge.net. This is followed by the IP address Cisco hosts the same web content on different servers throughout the world (known as mirrors). Therefore, depending upon where you are geographically, the FQDN and the IP address will be different.

Four pings were sent and a reply was received from each ping. Because each ping received a response, there was 0% packet loss. On average, it took 3005 ms (3005 milliseconds) for the packets to cross the network. A millisecond is 1/1,000th of a second. Your results will likely be different.

Part 2: Tracing a Route to a Remote Server Using Traceroute

Now that basic reachability has been verified by using the ping tool, it is helpful to look more closely at each network segment that is crossed.

Routes traced can go through many hops and a number of different Internet Service Providers (ISPs), depending on the size of your ISP and the location of the source and destination hosts. Each “hop” represents a router. A router is a specialized type of computer used to direct traffic across the Internet. Imagine taking an automobile trip across several countries using many highways. At different points in the trip you come to a fork in the road in which you have the option to select from several different highways. Now further imagine that there is a device at each fork in the road that directs you to take the correct highway to your final destination. That is what a router does for packets on a network.

Because computers talk in decimal or hexadecimal numbers, rather than words, routers are uniquely identified using IP addresses. The traceroute tool shows you what path through the network a packet of information takes to reach its final destination. The traceroute tool also gives you an idea of how fast traffic is going on each segment of the network. Packets are sent to each router in the path, and the return time is measured in milliseconds.

To do this, the traceroute tool is used.

a. At the terminal prompt, type traceroute www.cisco.com.

[analyst@secOps ~]$ traceroute www.cisco.com
traceroute to www.cisco.com (, 30 hops max, 60 byte packets
1 ( 6.527 ms 6.783 ms 6.826 ms
2 ( 27.748 ms 27.533 ms 27.480 ms
3 ( 27.864 ms 28.570 ms 28.566 ms
4 ( 29.063 ms 35.025 ms 33.976 ms
5 fed1bbrj01.xe110.0.rd.sd.cox.net ( 39.101 ms 39.120 ms
39.108 ms
6 a184-24-123-103.deploy.static.akamaitechnologies.com (
38.004 ms 13.583 ms 13.612 ms

b. If you would like to save the traceroute output to a text file for later review, use the right carat (>) and the desired filename to save the output in the present directory. In this example, the traceroute output is saved in the /home/analyst/cisco-traceroute.txt file.

[analyst@secOps ~]$ traceroute www.cisco.com > cisco-traceroute.txt

You can now enter the cat cisco-traceroute.txt command to view the output of the trace stored in the text file.

c. Perform and save the traceroute results for one of the following websites. These are the Regional Internet Registry (RIR) websites located in different parts of the world:

Africa: www.afrinic.net
Australia: www.apnic.net
Europe: www.ripe.net
South America: www.lacnic.net

Note: Some of these routers along the route may not respond to traceroute.

Part 3: Trace a Route to a Remote Server Using Web-Based Traceroute Tool

a. Open a web browser in the VM and navigate to http://www.monitis.com/traceroute/.

b. Enter any website you wish to replace Example: google.com and press Start Test.

c. Review the geographical locations of the responding hops. What did you observe regarding the path?
It does not always take the shortest path from the source to the destination.


How is the traceroute different when going to www.cisco.com or other websites from the terminal (see Part 2) rather than from the online website? (Your results may vary depending upon where you are located geographically, and which ISP is providing connectivity to your school.)
The traceroute from the terminal is different than the one from the website. The domains, such as cisco.com, can be hosted on many websites or mirrors throughout the world. This is done so that access time to the site will be fast from anywhere in the world.

0 0 votes
Article Rating
Notify of

Inline Feedbacks
View all comments
Would love your thoughts, please comment.x